Publications of Dr Abdelbary Elhissi
Papers
Tapas Sen, Sarah J. Sheppard, Tim Mercer, Abdelbary Elihissi. Fabrication of lipid bilayer coated stable superparamagnetic core-shell nanoparticles in suspension for in vitro investigation of anticancer drug mitomycin C. RSC Advances, In press.
N. R. Khalid, Ejaz Ahmed, M. Ikram, M. Ahmad, David A. Phoenix, Abdelbary Elhissi, Waqar Ahmed and Mark J. Jackson. Effects of Calcination on Structural, Photocatalytic Properties of TiO2 Nanopowders Via TiCl4 Hydrolysis. Journal of Materials Engineering and Performance, In press.
Abdelbary M.A. Elhissi, Waqar Ahmed, Israr Ul Hassan, Vinod R. Dhanak, Antony D’Emanuele. Carbon nanotubes in cancer therapy and drug delivery. Journal of Drug Delivery, in press.
Maha Nasr, Samrana Nawaz, Abdelbary Elhissi. Amphotericin B lipid nanoemulsion aerosols for targeting peripheral respiratory airways via nebulization. International Journal of Pharmaceutics, 436 (2012) 611-616.
Abdelbary M. Elhissi, Joanna Giebultowicz, P. Wroczynski, Ana A. Stec, Waqar Ahmed, Mohamed A. Alhnan, David Phoenix, Kevin M. Taylor. Nebulization of ultradeformable liposomes: The influence of aerosolization mechanism and formulation excipients. International Journal of Pharmaceutics, 436 (2012) 519-526.
Abdelbary M.A. Elhissi, Waqar Ahmed, Kevin M.G. Taylor. Laser diffraction and electron microscopy studies on inhalable liposomes generated from particulate-based proliposomes within a medical nebulizer. Journal of Nanoscince and Nanotechnology, 12 (2012) 6693-6699.
Abdelbary M.A. Elhissi, Waqar Ahmed, David McCarthy, Kevin M.G. Taylor. A study of size, microscopic morphology and dispersion mechanism of structures generated on hydration of proliposomes. Journal of Dispersion Science and Technology, 33 (2012) 1121-1126.
Mukhtar Ahmed, T. Byrne, Abdelbary Elhissi, David Phoenix, Waqar Ahmed. Vibrational and AFM studies of the adsorption of glycine on DLC and si-DLC samples. Journal of Materials Science, 47 (2012) 1729-1736.
Abdelbary Elhissi, H. Gill, Waqar Ahmed, Kevin Taylor. Vibrating-mesh nebulization of liposomes generated using an ethanol-based proliposome technology. Journal of Liposome Research, 21 (2011) 173-180.
Abdelbary M.A. Elhissi, Michael O’Neill, Waqar Ahmed, Kevin M.G. Taylor. High-sensitivity differential scanning calorimetry for measurement of steroid entrapment in nebulised liposomes generated from proliposomes. Micro & Nano Letters, 6 (2011) 694-697.
Michael Taylor, Abdelbary M. Elhissi. Predicting the physical properties of tablets from ATR-FTIR spectra using partial least squares regression. Pharmaceutical Development and Technology, 16 (2011) 110-117.
Abdelbary M.A. Elhissi, M. Ashraful Islam, Basel Arafat, Michael Taylor, Waqar Ahmed. Development and characterisation of freeze-dried liposomes containing two anti-asthma drugs. Micro and Nano Letters, 5 (2010) 184-188.
Thu Ghazanfari, Abdelbary M. Elhissi, Zhea Ding, Kevin M. Taylor. The influence of fluid physicochemical properties on vibrating-mesh nebulization. International Journal of Pharmaceutics, 339 (2007) 103-111.
Abdelbary M. Elhissi, M.Faizi, Waseem F. Naji, H.S. Gill, Kevin M. Taylor.Physical stability and aerosol properties of liposomes delivered using an air-jet nebulizer and a novel micropump device with large mesh apertures. International Journal of Pharmaceutics, 334 (2007) 62-70
Abdelbary M. Elhissi, Kiran K. Karnam, M.R. Danesh-Azari, H.S. Gill, Kevin M. Taylor. Formulations generated from ethanol-based proliposomes for delivery via medical nebulizers. Journal of Pharmacy and Pharmacology, 58 (2006) 887-894.
Abdelbary M. Elhissi, Michael A. O’Neill, Simon A. Roberts, Kevin M. Taylor. A calorimetric study of dimyristoylphosphatidylcholine phase transitions and steroid-liposome interactions for liposomes prepared by thin film and proliposome methods. International Journal of Pharmaceutics, 320 (2006) 124-130.
Abdelbary M.A. Elhissi, Kevin M.G. Taylor. Delivery of liposomes generated from proliposomes using air-jet, ultrasonic, and vibrating-mesh nebulisers. Journal of Drug Delivery Science and Technology 15 (2005) 261-265.
Book chapters
Mukhtar H. Ahmed, J.A. Byrne, T.E. Keyes, Waqar Ahmed, Abdelbary Elhissi, Mark J. Jackson, Ejaz Ahmed B. Zakariya. Chapter 1: Characteristics and applications of titanium oxide as a biomaterial for medical implants. In: “The design and manufacture of medical devices”, ed. J.P. Davim, WoodHead, Cambridge, UK, in press
Waqar Ahmed, Abdelbary Elhissi, Mark J. Jackson, Ejaz Ahmed, B. Zakariya. Chapter 2: Precision machining of medical devices. In: “The design and manufacture of medical devices”, ed. J.P.Davim, WoodHead, Cambridge, UK, in press
Abdelbary Elhissi, Waqar Ahmed. Chapter 1: Advances in design and technology of devices manufactured for drug delivery applications. In: “Medical Device Manufacturing”, ed. M.J. Jackson, J.P. Davim, Nova Publishers, USA, 2011.
Tapas Sen, Sarah Sheppard, Tim Mercer, Abdelbary Elhissi. “Magnetoliposomes: Stability of magnetic nanoparticles in suspension for drug delivery” NSTI-Nanotech 2010, http://www.nsti.org., ISBN 978-1-4398-3401-5 Vol.1, 2010, page 924-927, CRC press, Taylor & Francis group.
Kevin M.G Taylor, Abdelbary M.A. Elhissi. Preparation of liposomes for delivery from medical nebulizers. Liposome Technology Volume I, 2007, Gregoriadis G., ed. Informa Healthcare, USA. pp67- 84.
Books
Abdelbary M.A. Elhissi, Kevin M.G. Taylor, Waqar Ahmed. Nanocarrier Systems for Drug Delivery for the Treatment of Asthma. Lambert Academic Publishing: Germany; 2011.
J. Dyke, Abdelbary Elhissi, Paul Joyce, Peter Lumsden. Impact: Linking Teaching and Research, School of Pharmacy and Pharmaceutical Sciences- Published by Centre for Research Informed Teaching, University of Central Lancashire, UK (2010).
Recent Papers
Amphotericin B lipid nanoemulsion aerosols for targeting peripheral respiratory airways via nebulization
M. Nasr, S. Nawaz, A.M.A. Elhissi.
International Journal of Pharmaceutics, Accepted for publication
Nebulization of ultradeformable liposomes: The influence of aerosolization mechanism and formulation excipients,
A.M.A. Elhissi, J. Giebultowicz, A. A. Stec, P. Wroczynski, W. Ahmed, M.A. Alhnan, D. Phoenix, K.M.G. Taylor.
International Journal of Pharmaceutics, in press
Fabrication of lipid bilayer coated stable superparamagnetic core-shell nanoparticles in suspension for in vitro investigation of anticancer drug mitomycin C
T. Sen, S. J. Sheppard, T. Mercer, A. Elihissi
RSC Advances, in press
Laser diffraction and electron microscopy studies on inhalable liposomes generated from particulate-based proliposomes within a medical nebulizer.
A.M.A. Elhissi, W. Ahmed, K.M.G. Taylor.
Journal of Nanoscince and Nanotechnology, in press.
A study of size, microscopic morphology and dispersion mechanism of structures generated on hydration of proliposomes
A.M.A. Elhissi, W. Ahmed, D. McCarthy, K.M.G. Taylor
Journal of Dispersion Science and Technology, in press
Carbon nanotubes in cancer therapy and drug delivery
A.M.A. Elhissi, W. Ahmed, I Hassan, V.R. Dhanak, A. D’Emanuele
Journal of Drug Delivery, in press.
Vibrational and AFM studies of the adsorption of glycine on DLC and si-DLC samples
M. Ahmed, T. Byrne, A. Elhissi, D. Phoenix, W. Ahmed
Journal of Materials Science, in press
High-sensitivity differential scanning calorimetry for measurement of steroid entrapment in nebulised liposomes generated from proliposomes
A.M.A. Elhissi, M. O’Neill, W. Ahmed, K.M.G. Taylor.
Micro & Nano Letters, 6 (2011) 694-697
Vibrating-mesh nebulization of liposomes generated using an ethanol-based proliposome technology
Elhissi, H. Gill, W. Ahmed, K. Taylor.
Journal of Liposome Research, 21 (2011) 173-180
Predicting the physical properties of tablets from ATR-FTIR spectra using partial least squares regression
M. Taylor, A.M. Elhissi
Pharmaceutical Development and Technology, 16 (2011) 110-117
Papers 2005-2010
Development and characterisation of freeze-dried liposomes containing two anti-asthma drugs
A.M.A. Elhissi, A.M. Islam, B. Arafat, M. Taylor, W. Ahmed
Micro & Nano Letters, 5 (2010) 184-188
Physical stability and aerosol properties of liposomes delivered using an air-jet nebulizer and a novel micropump device with large mesh apertures
A.M.A. Elhissi, M.Faizi, W.N. Al Bazaz, H.S.Gill, K.M.G. Taylor,
International Journal of Pharmaceutics, 334 (2007) 62-70
The influence of fluid physicochemical properties on vibrating-mesh nebulization
T. Ghazanfari, A.M.A. Elhissi, Z. Ding, K.M.G. Taylor
International Journal of Pharmaceutics, 339 (2007) 103-111
Effects of Bias Voltage on Diamond Like Carbon Coatings Deposited Using Titanium Isopropoxide (TIPOT) and Acetylene/Argon Mixtures onto Various Substrate Materials
R. Said, C. A. A. Ghumman, O. M. N. D. Teodoro, W. Ahmed, A. Abuazza, andJ. Gracio
J. Nanosci. Nanotechnol. 10, 2552–2557 (2010)
Closed Field Unbalanced Magnetron Sputtering Ion Plating of Ni/Al Thin Films: Influence of the Magnetron Power
R. Said, W. Ahmed, and J. Gracio
J. Nanosci. Nanotechnol. 10, 2558–2563 (2010)
Growth and Characterisation of NiAl and N-Doped NiAl Films Deposited by Closed Field Unbalanced Magnetron Sputtering Ion Plating Using Elemental Ni and Al Targets
R. Said, W. Ahmed, T. Abuain, A. Abuazza, and J. Gracio
J. Nanosci. Nanotechnol. 10, 2600–2605 (2010)
Properties of NiAl and Ni-Al-N Thin Films Deposited by Closed Field Unbalanced Magnetron Sputter Ion Plating Using Elemental Ni and Al Targets
M. N. Baig, W. Ahmed, F. A. Khalid, R. M. Said, and J. McLaughlin
J. Nanosci. Nanotechnol. 9, 4034-4039 (2009)
Characterisation of DLC Films Deposited Using Titanium Isopropoxide (TIPOT) at Different Flow Rates
R. Said, N. Ali, C. A. A. Ghumman, O. M. N. D. Teodoro, and W. Ahmed
J. Nanosci. Nanotechnol. 9, 4298-4304 (2009)
Growth of Nano Size Grains in CuInSe2 Thin Films Using E-Beam Deposition Technique
E. Ahmed, M. S. Abid, and W. Ahmed
J. Nanosci. Nanotechnol. 9, 4233-4239 (2009)
Commercialisation of nanotechnologies: technology transfer from university research laboratories
M. J. Jackson, G.M. Robinson, M.D. Whitfield, W. Ahmed
Int. J. of Nanomanufacturing 4 (1-4) 308 – 316 (2009)
Effects of Bias Voltage on Diamond Like Carbon Coatings Deposited Using Titanium Isopropoxide (TIPOT) and Acetylene/Argon Mixtures onto Various Substrate Materials
R. Said, C. A. A. Ghumman, O. M. N. D. Teodoro, W. Ahmed, A. Abuazza, J. Gracio,
J. Nanosci. Nanotechnol., 10 (4), 2552-2557(6) (2010)
Finite element analysis of mechanical micromilling processes;
M.J. Jackson, G.M. Robinson, W. Ahmed
Int. J. of Nanomanufacturing 3,(1/2), 112–132, (2009)
Formation of nanostructured metal particles using negative rake angle cutting tools
M. J. Jackson, M. D. Whitfield, W. Ahmed
Int. J. of Nanomanufacturing 4 (1-4), 326–341, (2009)
A multifunctional high-speed spindle for micromachining medical materials
M. J. Jackson, C. Xu, W. Ahmed
Int. J. of Nano and Biomaterials 2 (6), 520–539, (2009)
Diamond coated microtools for machining compact bone
M. J. Jackson, M. D. Whitfield, C. Xu, W. Ahmed
Int. J. of Nano and Biomaterials 2(6), 505–519, (2009)
Comparative dynamic response of mesomachine tool structures
M. J. Jackson, L. J. Hyde, G. M. Robinson, W. Ahmed
Int. J. of Computational Materials Science and Surface Engineering 2,(1/2), 18–40, (2009)
Impact of surface roughness of diamond coatings on the cutting performance when dry machining of graphite
G. Cabral, P. Reis, E. Titus, J.C. Madaleno, J.P. Davim, J. Gracio, W. Ahmed, M. J. Jackson
Int. J. of Manufacturing Technology and Management 15(2), 121–152, (2008)
Shear strain induced formation of nanostructured pure metals
M.J. Jackson, J.S. Morrell, W. Ahmed
Int. J. of Nanoparticles 1(4), 271–282, (2008)
Observation of shear plane instability during microgrinding of plastic metals
M. J. Jackson, M. D. Whitfield, J. S. Morrell, W. Ahmed
Int. J. of Nanomanufacturing 2(6), 643–658, (2008)
Diamond film deposition on M2 steel using TiN interlayers
W. Ahmed, M. Amar, H. Sein, H. Taylor, R. Polini, M. J. Jackson
Int. J. of Nano and Biomaterials 1(3), 351–363, (2008)
Review: titanium and titanium alloy applications in medicine
M. Balazic, J. Kopac, M. J. Jackson, W. Ahmed
Int. J. of Nano and Biomaterials – Vol. 1(1) 3–34, (2007)
The human micro-vascular endothelial cells in vitro interaction with atomic-nitrogen-doped diamond-like carbon thin films
T. I. T. Okpalugo, A. A. Ogwu, R. W. McCullough, W. Ahmed
Journal of Biomedical Materials Research Part B: Applied Biomaterials (2007)
Modeling on the mechanical properties of nanocomposite hydroxyapatite/PMMA/carbon nanotube coatings;
T. Shokuhfar, E. Titus, G. Cabral, A. C.M. Sousa, J. Gracio, W. Ahmed, T. Okpalugo, A. Makradi, S. Ahzi
Int. J. Nano Biomaterials; Vol 1(2), 107-115, (2007)
Fabrication and wear of nitrogen-doped diamond microtools
M. J. Jackson, W. Ahmed
Int. J. of Nanomanufacturing 1(3), 430–453, (2007)
Micromachining M2 tool steel using nanostructured titanium-doped cutting tools
Mark J. Jackson, Grant M. Robinson, Waqar Ahmed, Christopher A. Rego, Wolf-Dieter Munz
Int. J. of Nanomanufacturing 1(3), 370–388, (2007)
Burr formation and elimination in micromilling processes
M. J. Jackson, G. M. Robinson, M. D. Whitfield, W. Ahmed
Int. J. of Nanomanufacturing 1(4), 458–467, (2007)
Machining M42 tool steel using superlattice layered nanocrystalline coatings deposited to WC-Co milling tools
M. J. Jackson, G. M. Robinson, M. D. Whitfield, W. Ahmed
Int. J. of Nanomanufacturing 1(4), 506–515, (2007)
Two approaches to effective ventilation system design for the biomedical device and pharmaceutical industries
R. G. Handy, D. Goodman, S. Odukomaiya, M. Rodriguez, M. Whitfield, W. Ahmed, M. J. Jackson
Int. J. of Nano and Biomaterials 1(1), 35–49, (2007)
Dental drilling in severe and demanding environments
M. J. Jackson, H. Sein, W. Ahmed, H. Taylor
Int. J. of Nano and Biomaterials 1(2), 165–183, (2007)
Diamond coated molybdenum dental tools for machining orthodontic bridgework materials
M. J. Jackson, W. Ahmed, H. Sein, H. Taylor
Int. J. of Nano and Biomaterials 1(2), 184–199, (2007)
Direct production of nitrogen-doped diamond microtools
M.J. Jackson, W. Ahmed
Int. J. of Surface Science and Engineering 1 (4), 325–343, (2007)
A calorimetric study of dimyristoylphosphatidylcholine phase transitions and steroid-liposome interactions for liposomes prepared by thin film and proliposome methods
A.M.A. Elhissi, M.A.A. O’Neill, S.A. Roberts, and K.M.G Taylor
International Journal of Pharmaceutics 320 (2006) 124-130
Formulations generated from ethanol-based proliposomes for delivery via medical nebulizers
A.M.A. Elhissi, K.K. Karnam, M.R. Danesh,, H.S. Gill, and K.M.G. Taylor,
Journal of Pharmacy and Pharmacology 58 (2006) 887-894
Delivery of liposomes generated from proliposomes using air-jet, ultrasonic, and vibrating-mesh nebulisers
A.M.A. Elhissi and K.M.G. Taylor
Journal of Drug Delivery Science and Technology 15 (2005) 261-265
Analysis and design of extremely high-speed spindles for nanomachining applications
Jackson MJ, Robinson G M, Hyde L J, Kanjarkar K, Cui J, Ahmed W
International Journal of Nanomanufacturing, Vol. 1, No. 2, 153-172 (2006)
Micromilling of bipolar fuel cell plates using titanium- and diamond-coated cutting tools
Jackson M J, Robinson G M, Brady M P, Ahmed W
International Journal of Nanomanufacturing, Vol. 1, No. 2, 290-303 (2006)
Micromachining selected metals using diamond coated cutting tools
Jackson M J, Robinson G M, Brady M P, Ahmed W,
International Journal of Nanomanufacturing, Vol. 1, No. 2, Pages 304-317 (2006)
“Dynamic response of a tetrahedral nanomachining machine tool structure
Jackson M J, Hyde L J, Robinson G M, Ahmed W,
International Journal of Nanomanufacturing, Vol. 1, No. 1, 26-46, (2006)
Laser annealing of flash-evaporated CulnSe2 thin films
Ahmed E, Amar M, Ahmed W, Pilkington R D, Hill A E, Jackson M J,
Journal of Materials Engineering and Performance, Vol. 15, No. 2, 213-217 (2006)
Nucleation studies of pulsed bias enhanced CVD of diamond on biomaterials
Ahmed W, Rego CA, I U Hassan, Jackson MJ
Journal of Materials Engineering and Performance, Vol. 15, No. 2, 192-194, (2006)
Hot-filament chemical vapor deposition of polycrystalline diamond coatings to interlayered steel
Amar M, Ahmed W, Taylor H, Jackson M J, Hassan I U,
Journal of Materials Engineering and Performance, Vol. 15, No. 2, 187-191, (2006)
“Time-modulated CVD process optimized using the Taguchi method”,
Ahmed W, Ahmed E, Maryan C, Jackson M J, Ogwu A A, Ali N, Neto V F, Gracio J,
Journal of Materials Engineering and Performance, Vol. 15, No. 2, 236-241, (2006)
Human microvascular endothelial cell seeding on Cr-DLC thin films for heart valve application
Ali N, Kousar Y, Gracio J, Titus E, Okpalugo T I , Singh V, Pease M, Ogwu A A, Meletis E I, Ahmed W, Jackson M J,
Journal of Materials Engineering and Performance, Vol. 15, No. 2, 230-235, (2006)
A study of diamond synthesis by hot filament chemical vapor deposition on NC coatings
Polini R, Kumashiro S, Jackson M J, Amar M, Ahmed W, Sein H,
Journal of Materials Engineering and Performance, Vol. 15, No. 2, 218-222, ( 2006)
Effects of Ti- and Zr-based interlayer coatings on the hot filament chemical vapour deposition of diamond on high speed steel
Polini R, Mantini F P, Braic M, Amar M, Ahmed W, Taylor H, (Jan 2006)
Thin Solid Films, Vol. 494, No. 1-2, Pages 116-122, (2006)
A study of diamond synthesis by hot filament chemical vapour deposition on nanocomposite coatings
Polini R, Amar M, Ahmed W, Kumashiro S, Sein H, Colligon J,
Thin Solid Films, Vol. 489, No. 1-2, 116-121, (2005)
Experimental and gas phase modelling of nanocrystalline diamond films grown on titanium alloys for biomedical applications
Jackson M J, Jones A N, Ahmed W
Journal of Materials Engineering and Performance, Vol. 14, No. 5, 565-568, (2005)
Surface characterization of (111) and (100) textured diamond coatings deposited to silicon
Jackson M J, Robinson G M, Sein H, Ahmed W, Ali N, Misra D S, (Oct 2005)
Journal of Materials Engineering and Performance, Vol. 14, No. 5, 666-670, (2005)
Characterization of N-doped polycrystalline diamond films deposited on microgrinding tools
Jackson M J, Ahmed W
Journal of Materials Engineering and Performance, Vol. 14, No. 5, 654-665, (2005)
Machining cancellous bone prior to prosthetic implantation
Jackson M J, Robinson G M, Sein H, Ahmed W, Woodwards R
Journal of Materials Engineering and Performance, Vol. 14, No. 3, 293-300 (2005)
Time-modulated chemical vapor deposition of diamond films
Jackson M J, Robinson G M, Ahmed W, Sein H, Jones A N, Ali N, Titus E, Fan Q H, Gracio J, (Apr 2005)
Journal of Materials Engineering and Performance, Vol. 14, No. 2, 163-172 (2005)